Our idea when buying and using equipment is that we hope that the equipment can be used without problems and that the equipment will be used for a long time. Therefore, in order to avoid problems in the use of the glass water filling machine, we need to Do relevant safety inspections. Details are as follows:
1. Check before use: Make sure that the 380V power supply is connected to the power plug of the filling machine and the grounding wire of the casing before starting. Check whether the motor and bearings need to be lubricated. Oil-free operation is strictly prohibited. Start the machine after normal. At the same time, observe whether there are material chain plates in all liquid storage tanks and whether there are debris on the conveyor belt. Whether there is a cap on the cap storage track. Whether the water source, power source, and air source are connected to the used liquid storage tank. Whether the material chain plate is stuck on the conveyor belt, whether there is debris on the storage cap track, mainly depends on whether there is a bottle cap, whether the water source, power supply, and air source are connected, whether the fasteners of each part are loose, and after each part is running stably, Can be used normally.
2. Check whether the safety facilities function normally, the reaction tank valve is tightly connected with the filter device pipeline, the filter cloth of the filter device is intact, and the filter cloth is intact. Cover the cover and tighten the bolts to ensure that there is no leakage under the packing pressure. Check the connection lines used related to the glass water filling machine to ensure that there is no broken skin or short circuit.
3. Before starting the glass water filling machine, carefully check whether there is water in the water tanks, whether the chain plates are stuck, whether there are impurities on the conveyor belt, whether there are bottle caps in the bottle cap storage box, whether the water source, power supply, and air source are connected through. After the conditions are ready, turn on the main power QF, the power indicator is on, the fault indicator and the emergency stop indicator are off, and the start conditions are reached, press the start button on the control box, and move the start switch at the filling point. After the buzzer emits three warnings, the whole machine starts to run and enters the automatic working mode of external washing, water washing and filling. When the machine stops, press the stop button of the filling place and the control box. After shutting down, turn off the main power supply.
Well, the work we need to do before using the filling machine described above, we hope to help you better use the equipment and increase help for your enterprise's processing and production.