Introduction to the principle and use of semi-automatic filling machine


We literally understand that "semi-automatic filling machine" is a filling machine equipment different from a fully automatic filling machine. The main function of the semi-automatic filling machine is filling, with fewer additional functions. Different from the automatic filling machine, it can be equipped with auxiliary equipment such as conveyor belt, capping machine, inkjet machine, cartoning machine, and sealing machine.
There are many types of semi-automatic filling machines. The filling principle can be divided into volume measurement type, mass measurement type and volume mass type. According to the number of filling heads, it can be divided into single head, double head and multi head. Different filling machines have different performance and work efficiency. However, there are two main problems at present, one is the filling speed, and the other is the measurement accuracy. These are the two main performance indicators of the edible oil filling machine.
Principle of semi-automatic filling machine:
A. Dy series filling machine is a semi-automatic piston filling machine. The piston is driven by the cylinder to extract and discharge materials. The flow direction of the material is controlled by a one-way valve, and the stroke of the cylinder is controlled by a magnetic spring switch.
B. This machine has reasonable design, small size and convenient operation. The pneumatic part adopts pneumatic components of FESTO and AIRTAC.
C. Material contacts are made of 316L stainless steel, which meets GMP requirements.
D. The filling volume and filling speed can be adjusted arbitrarily, and the filling accuracy is high.
E. The filling head adopts a drip-proof lifting filling device.
The filling machine needs regular inspection and maintenance
1. The water separator is usually discharged from the semi-automatic gas-water filling machine.
2. Often add semi-automatic filling oil mist oil into one-third cup.
3. The filter and water cup of the steam-water separator should be cleaned regularly. The filter element needs to be cleaned with mineral oil and then blown clean with compressed air.
4. The upper sealing ring of the exhaust piston and the lower sealing ring of the exhaust cylinder should be replaced in time when they are worn.
5. No foreign matter should be mixed into the packing, otherwise it may cause inaccurate discharge or damage the machine parts.
6. In order to keep the stainless steel valve body clean, do not scratch the surface with sharp and hard tools. If it is dirty, wipe it with alcohol.
7. The cylinder has been oiled on the factory site. Do not add lubricant to or in the cylinder.
8. Semi-automatic filling machine, single valve, stainless steel tee, barrel, easy to clean.

Related News

Product Recommended

  • Laundry liquid fillin...
  • Disinfectant filling ...
  • Washing supplies fill...
  • Filling machine produ...
  • Linear filling machine
  • Automatic filling equ...